Quick answer
Keep the ball on the winding sand route between the two horizontal laser lanes. Connect the left creature pocket before opening the separate lower pocket, rather than cutting across either beam.
- Level
- Level 6
- Difficulty
- Normal
- Objective
- Guide the red character to the green creatures in level 6, keeping each separated pocket reachable before the last drop.
Video walkthrough
Video by Go Answer on YouTubeWatch on YouTube
YouTube loads only when you press play. You can also open the video on YouTube.
Step-by-step
Trace the laser line before opening any crossing. Keep the red ball behind solid cover until that crossing is visibly safe.
Round the bottom of the turn instead of leaving a sharp corner. A smooth floor helps the ball follow the bend.
Check each branch for creatures before opening the final drop. A direct shortcut can leave a side pocket permanently out of reach.
Open the final downward connection after the upper route is clear. Keep the landing pocket wide enough for the enlarged ball.
Check the bright line before each release, including the return path. A route that is safe in one visible frame can change when surrounding objects move. Check the full target route after the last movement, including pockets above the final drop. If a creature remains, identify the earliest turn that missed it and change that local approach on the next attempt.
Tips
- Check the bright line before each release, including the return path. A route that is safe in one visible frame can change when surrounding objects move.
- Keep a shallow outer wall around the bend. It gives the red character a surface to follow instead of allowing a free fall past the pocket.
- Check the side branch before opening the lowest outlet. Once the character drops below a pocket, a later cut may no longer bring it back upward.
Common mistakes
- Opening the final outlet before checking higher target pockets can leave a creature above the character with no route back. Inspect the side entrances before making that irreversible drop.
- Removing several supports in one swipe makes the release order unpredictable. When a moving piece occupies the route, wait for it to settle before changing nearby sand.
Frequently asked questions
What should I check at the bright-line crossing?
Keep the ball on the winding sand route between the two horizontal laser lanes. Connect the left creature pocket before opening the separate lower pocket, rather than cutting across either beam. The crossing depends on the visible line and the positions of nearby objects. Compare the moment just before release in the recording. If your board differs, hold the starting support instead of assuming the same crossing is safe.
How do I keep the character in the curved passage?
An abrupt corner can redirect the character away from the next pocket. Keep the bend connected to its receiving floor; when the first attempt misses, adjust the approach angle rather than deepening the entire chamber.
Which side pocket must I check before the final drop?
Check the side branch before opening the lowest outlet. Once the character drops below a pocket, a later cut may no longer bring it back upward.