Quick answer
The diagonal wooden arm sits above a raised dark platform, with red balls and creatures on either side. Clear its moving space first, then connect the upper targets to the side pockets without losing a ball past the platform.
- Level
- Level 21
- Difficulty
- Normal
- Objective
- Guide the red character to the green creatures in level 21, keeping each separated pocket reachable before the last drop.
Video walkthrough
Video by Go Answer on YouTubeWatch on YouTube
YouTube loads only when you press play. You can also open the video on YouTube.
Step-by-step
Leave room for the wooden plank to change its angle. Remove sand around the moving end without trapping it against an untouched wall.
Clear the space beside the rotating arms, keeping the route away from their hubs. Wait for an opening rather than digging into the axle.
Check each branch for creatures before opening the final drop. A direct shortcut can leave a side pocket permanently out of reach.
Open the final downward connection after the upper route is clear. Keep the landing pocket wide enough for the enlarged ball.
Watch both ends of the wooden piece. Clearing one end while trapping the other can prevent the change of angle shown in the recording. Check the full target route after the last movement, including pockets above the final drop. If a creature remains, identify the earliest turn that missed it and change that local approach on the next attempt.
Tips
- Watch both ends of the wooden piece. Clearing one end while trapping the other can prevent the change of angle shown in the recording.
- Allow clearance beside the rotating arm tips, not only beneath the hub. The character’s route must remain usable after the arms change position.
- Check the side branch before opening the lowest outlet. Once the character drops below a pocket, a later cut may no longer bring it back upward.
Common mistakes
- Opening the final outlet before checking higher target pockets can leave a creature above the character with no route back. Inspect the side entrances before making that irreversible drop.
- Removing several supports in one swipe makes the release order unpredictable. When a moving piece occupies the route, wait for it to settle before changing nearby sand.
Frequently asked questions
What space does the wooden piece need?
The diagonal wooden arm sits above a raised dark platform, with red balls and creatures on either side. Clear its moving space first, then connect the upper targets to the side pockets without losing a ball past the platform. A wooden piece may lean into the same entrance the character needs. Compare both ends and the remaining support in the video. Clear a controlled movement area first, then check whether the resulting angle connects to the next pocket.
What should remain clear beside the rotating arms?
The arm tips sweep a larger area than the hub itself. Preserve a route beside that sweep and compare the opening available when the character arrives. Removing sand at the axle alone does not prepare the whole moving assembly.
Which side pocket must I check before the final drop?
Check the side branch before opening the lowest outlet. Once the character drops below a pocket, a later cut may no longer bring it back upward.