Quick answer
Handle the upper wooden support before descending toward the house-shaped dark frame. The creatures above and inside that frame occupy separate pockets, so prepare a route around its edges instead of cutting through the roof.
- Level
- Level 17
- Difficulty
- Normal
- Objective
- Guide the red character to the green creatures in level 17, keeping each separated pocket reachable before the last drop.
Video walkthrough
Video by Go Answer on YouTubeWatch on YouTube
YouTube loads only when you press play. You can also open the video on YouTube.
Step-by-step
Leave room for the wooden plank to change its angle. Remove sand around the moving end without trapping it against an untouched wall.
Keep the approach aligned with the narrow opening. Trim the sand a little at a time rather than widening both sides immediately.
Keep the solid divider in mind when joining the routes. Connect around its end; trying to erase the dark material will not create a passage.
Check each branch for creatures before opening the final drop. A direct shortcut can leave a side pocket permanently out of reach.
Watch both ends of the wooden piece. Clearing one end while trapping the other can prevent the change of angle shown in the recording. Check the full target route after the last movement, including pockets above the final drop. If a creature remains, identify the earliest turn that missed it and change that local approach on the next attempt.
Tips
- Watch both ends of the wooden piece. Clearing one end while trapping the other can prevent the change of angle shown in the recording.
- Judge the entrance using the character’s current size. A wide chamber behind a small mouth does not make that mouth passable; trim the actual bottleneck first.
- Trace the fixed wall to its end before committing to a side. Trying to join two pockets straight through dark material leaves a route that cannot connect.
Common mistakes
- Opening the final outlet before checking higher target pockets can leave a creature above the character with no route back. Inspect the side entrances before making that irreversible drop.
- Removing several supports in one swipe makes the release order unpredictable. When a moving piece occupies the route, wait for it to settle before changing nearby sand.
Frequently asked questions
What space does the wooden piece need?
Handle the upper wooden support before descending toward the house-shaped dark frame. The creatures above and inside that frame occupy separate pockets, so prepare a route around its edges instead of cutting through the roof. A wooden piece may lean into the same entrance the character needs. Compare both ends and the remaining support in the video. Clear a controlled movement area first, then check whether the resulting angle connects to the next pocket.
Why does the narrow entrance need attention?
The visible opening may be smaller than the character at the moment it arrives. Check the entrance and exit separately, remove a blocking lip locally and preserve enough floor for the character to leave the passage.
Which part of the fixed divider should I route around?
The dark barrier determines which pockets can connect directly. Find a usable end and prepare the continuation on that side before release. A cut aimed through the middle of the fixed material cannot substitute for that detour.