Quick answer
Use the long vertical wooden bar on the left of the divider to manage the two horizontal beam crossings. Prepare the lower-right creature well before releasing the ball from the upper-right pocket.
- Level
- Level 39
- Difficulty
- Normal
- Objective
- Guide the red character to the green creatures in level 39, keeping each separated pocket reachable before the last drop.
Video walkthrough
Video by Go Answer on YouTubeWatch on YouTube
YouTube loads only when you press play. You can also open the video on YouTube.
Step-by-step
Leave room for the wooden plank to change its angle. Remove sand around the moving end without trapping it against an untouched wall.
Trace the laser line before opening any crossing. Keep the red ball behind solid cover until that crossing is visibly safe.
Keep the solid divider in mind when joining the routes. Connect around its end; trying to erase the dark material will not create a passage.
Open the final downward connection after the upper route is clear. Keep the landing pocket wide enough for the enlarged ball.
Watch both ends of the wooden piece. Clearing one end while trapping the other can prevent the change of angle shown in the recording. Check the full target route after the last movement, including pockets above the final drop. If a creature remains, identify the earliest turn that missed it and change that local approach on the next attempt.
Tips
- Watch both ends of the wooden piece. Clearing one end while trapping the other can prevent the change of angle shown in the recording.
- Check the bright line before each release, including the return path. A route that is safe in one visible frame can change when surrounding objects move.
- Trace the fixed wall to its end before committing to a side. Trying to join two pockets straight through dark material leaves a route that cannot connect.
Common mistakes
- Opening the final outlet before checking higher target pockets can leave a creature above the character with no route back. Inspect the side entrances before making that irreversible drop.
- Removing several supports in one swipe makes the release order unpredictable. When a moving piece occupies the route, wait for it to settle before changing nearby sand.
Frequently asked questions
What space does the wooden piece need?
Use the long vertical wooden bar on the left of the divider to manage the two horizontal beam crossings. Prepare the lower-right creature well before releasing the ball from the upper-right pocket. A wooden piece may lean into the same entrance the character needs. Compare both ends and the remaining support in the video. Clear a controlled movement area first, then check whether the resulting angle connects to the next pocket.
What should I check at the bright-line crossing?
The crossing depends on the visible line and the positions of nearby objects. Compare the moment just before release in the recording. If your board differs, hold the starting support instead of assuming the same crossing is safe.
Which part of the fixed divider should I route around?
The dark barrier determines which pockets can connect directly. Find a usable end and prepare the continuation on that side before release. A cut aimed through the middle of the fixed material cannot substitute for that detour.