Quick answer
Leave room for the wooden plank to change its angle. Remove sand around the moving end without trapping it against an untouched wall. Several pivoted wooden bars form staggered rows above a red ball and a cluster of lower-left creatures.
- Level
- Level 97
- Difficulty
- Normal
- Objective
- Guide the red character to the green creatures in level 97, keeping each separated pocket reachable before the last drop.
Video walkthrough

Video by Go Answer on YouTubeWatch on YouTube
YouTube loads only when you press play. You can also open the video on YouTube.
Step-by-step
Locate the red ball and every green creature before cutting. Keep the starting support until the route below is ready.
Leave room for the wooden plank to change its angle. Remove sand around the moving end without trapping it against an untouched wall.
Clear the space beside the rotating arms, keeping the route away from their hubs. Wait for an opening rather than digging into the axle.
Guide the ball through the remaining creature pockets. Check the edges of the cleared route before assuming that the board is finished.
Check the full target route after the last movement, including pockets above the final drop. If a creature remains, identify the earliest turn that missed it and change that local approach on the next attempt.
Tips
- Watch both ends of the wooden piece. Clearing one end while trapping the other can prevent the change of angle shown in the recording.
- Allow clearance beside the rotating arm tips, not only beneath the hub. The character’s route must remain usable after the arms change position.
- Count the separated pockets rather than following only the lowest creature. The target furthest from the main chute may need a short detour before the final drop.
Common mistakes
- Opening the final outlet before checking higher target pockets can leave a creature above the character with no route back. Inspect the side entrances before making that irreversible drop.
- Removing several supports in one swipe makes the release order unpredictable. When a moving piece occupies the route, wait for it to settle before changing nearby sand.
Frequently asked questions
What space does the wooden piece need?
Several pivoted wooden bars form staggered rows above a red ball and a cluster of lower-left creatures. A wooden piece may lean into the same entrance the character needs. Compare both ends and the remaining support in the video. Clear a controlled movement area first, then check whether the resulting angle connects to the next pocket.
What should remain clear beside the rotating arms?
The arm tips sweep a larger area than the hub itself. Preserve a route beside that sweep and compare the opening available when the character arrives. Removing sand at the axle alone does not prepare the whole moving assembly.
How can I avoid leaving a green creature behind?
Count the separated pockets rather than following only the lowest creature. The target furthest from the main chute may need a short detour before the final drop.