Quick answer
Clear the space beside the rotating arms, keeping the route away from their hubs. Wait for an opening rather than digging into the axle. A four-armed rotor sits between branching upper channels and three lower red-ball compartments separated by black vertical bars.
- Level
- Level 346
- Difficulty
- Normal
- Objective
- Guide the red character to the green creatures in level 346, keeping each separated pocket reachable before the last drop.
Video walkthrough
Video by MiniBoss on YouTubeWatch on YouTube
YouTube loads only when you press play. You can also open the video on YouTube.
Step-by-step
Locate the red ball and every green creature before cutting. Keep the starting support until the route below is ready.
Clear the space beside the rotating arms, keeping the route away from their hubs. Wait for an opening rather than digging into the axle.
Keep the solid divider in mind when joining the routes. Connect around its end; trying to erase the dark material will not create a passage.
Check each branch for creatures before opening the final drop. A direct shortcut can leave a side pocket permanently out of reach.
Check the full target route after the last movement, including pockets above the final drop. If a creature remains, identify the earliest turn that missed it and change that local approach on the next attempt.
Tips
- Allow clearance beside the rotating arm tips, not only beneath the hub. The character’s route must remain usable after the arms change position.
- Trace the fixed wall to its end before committing to a side. Trying to join two pockets straight through dark material leaves a route that cannot connect.
- Check the side branch before opening the lowest outlet. Once the character drops below a pocket, a later cut may no longer bring it back upward.
Common mistakes
- Opening the final outlet before checking higher target pockets can leave a creature above the character with no route back. Inspect the side entrances before making that irreversible drop.
- Removing several supports in one swipe makes the release order unpredictable. When a moving piece occupies the route, wait for it to settle before changing nearby sand.
Frequently asked questions
What should remain clear beside the rotating arms?
A four-armed rotor sits between branching upper channels and three lower red-ball compartments separated by black vertical bars. The arm tips sweep a larger area than the hub itself. Preserve a route beside that sweep and compare the opening available when the character arrives. Removing sand at the axle alone does not prepare the whole moving assembly.
Which part of the fixed divider should I route around?
The dark barrier determines which pockets can connect directly. Find a usable end and prepare the continuation on that side before release. A cut aimed through the middle of the fixed material cannot substitute for that detour.
Which side pocket must I check before the final drop?
Check the side branch before opening the lowest outlet. Once the character drops below a pocket, a later cut may no longer bring it back upward.