Quick answer
Two red balls sit above a central gap between black ledges, with a four-armed wooden rotor and two green creatures in the open drop, and a third red ball beside triangular sand wedges at the bottom. Clear the space beside the rotating arms, keeping the route away from their hubs. Wait for an opening rather than digging into the axle.
- Level
- Level 162
- Difficulty
- Normal
- Objective
- Guide the red character to the green creatures in level 162, keeping each separated pocket reachable before the last drop.
Video walkthrough
Video by Go Answer on YouTubeWatch on YouTube
YouTube loads only when you press play. You can also open the video on YouTube.
Step-by-step
Locate the red ball and every green creature before cutting. Keep the starting support until the route below is ready.
Clear the space beside the rotating arms, keeping the route away from their hubs. Wait for an opening rather than digging into the axle.
Keep the approach aligned with the narrow opening. Trim the sand a little at a time rather than widening both sides immediately.
Prepare the receiving area before connecting the upper route to the drop. Keep the landing floor aimed toward the remaining targets, and remove the last starting support only when the character can continue onward.
Check the full target route after the last movement, including pockets above the final drop. If a creature remains, identify the earliest turn that missed it and change that local approach on the next attempt.
Tips
- Allow clearance beside the rotating arm tips, not only beneath the hub. The character’s route must remain usable after the arms change position.
- Judge the entrance using the character’s current size. A wide chamber behind a small mouth does not make that mouth passable; trim the actual bottleneck first.
- Complete the receiving pocket before releasing the upper support. A large fall is irreversible if the next creature remains above the landing.
Common mistakes
- Opening the final outlet before checking higher target pockets can leave a creature above the character with no route back. Inspect the side entrances before making that irreversible drop.
- Removing several supports in one swipe makes the release order unpredictable. When a moving piece occupies the route, wait for it to settle before changing nearby sand.
Frequently asked questions
What should remain clear beside the rotating arms?
Two red balls sit above a central gap between black ledges, with a four-armed wooden rotor and two green creatures in the open drop, and a third red ball beside triangular sand wedges at the bottom. The arm tips sweep a larger area than the hub itself. Preserve a route beside that sweep and compare the opening available when the character arrives. Removing sand at the axle alone does not prepare the whole moving assembly.
Why does the narrow entrance need attention?
The visible opening may be smaller than the character at the moment it arrives. Check the entrance and exit separately, remove a blocking lip locally and preserve enough floor for the character to leave the passage.
What needs to be ready before I open the drop?
Complete the receiving pocket before releasing the upper support. A large fall is irreversible if the next creature remains above the landing.